Specifications | Accuracy |
---|---|
Detection method | Hall element |
Measurement range | 1㎐~20㎑(using a 60P/R gear, 1~20,000r/min, with an output waveform duty cycle 50%±20%) |
Detection gear | Strong magnetic materials |
Gap between detector and gear | (modulus 0.5~3, tooth width 3 mm or greater) |
Power supply used | DC 12V±2V(0.5Vp-p or less ripple) |
Current consumption | 40mA or less(12V, at 25℃) |
Output waveform | LOW level; +0.5V or less, HIGH level; 5V±0.5V rectangular waveform (With no load) |
Output impedance | Approx. 330Ω |
Output type | Floating groung |
Protective circuit | Power supply polarity and output short protection |
Operating temperature range | -10℃~+70℃ |
Storage temperature range | -20℃~+80℃ |
Matching connector | 6-pin connector(type R04-PB6F plug) |
Allowable vibration | double-ended 1.2mm at 30㎐ in X, Y and Z direction |
(during-operation) | for one hour each |
Allowable shock(non-operating) | 490m/s2 in X and Y direction each 3 times |
Withstand voltage | 1. DC250V, 1min.(between shield and signal cable) 2. DC250V, 1min.(between shield and sensor head |
Interface indicator | DN-30 |
Weight | Approx. 80g(including two mounting nuts) |
Accessories | Mounting nuts(2) |