Toque Sensors

Dacell is providing ultra-precision load cells and various weighting and measuring products,
which can be used in various fields of industries, based on 20 years of experiences in manufacturing
of weighing and measuring products and with own superior technologies.

MP-981

RPM processor/tachometer (frequency input). The setup sequence is simple and quick using four push buttons only.

WP Editor : RPM processor/tachometer (frequency input). The setup sequence is simple and quick using four push buttons only.

SPECIFICATIONS TABLE
Specifications	Accuracy
Detection method	Hall element
Measurement range	1㎐~20㎑(using a 60P/R gear, 1~20,000r/min, with an output waveform duty cycle 50%±20%)
Detection gear	Strong magnetic materials
Gap between detector and gear	(modulus 0.5~3, tooth width 3 mm or greater)
Power supply used	DC 12V±2V(0.5Vp-p or less ripple)
Current consumption	40mA or less(12V, at 25℃)
Output waveform	Lew level;±0.5V rectangular waveform(With no loac)
Output impedance	Approx. 330Ω
Output type	Floating groung
Protective circuit	Power supply polarity and output short protection
Operating temperature range	-10℃~+70℃
Storage temperature range	-20℃~+80℃
Matching connector	6-pin connector(type R04-PB6F plug)
Allowable vibration	double-ended 1.2mm at 30㎐ in X, Y and Z direction
(during-operation)	for one hour each
Allowable shock(non-operating)	490m/s2 in X and Y direction each 3 times
Withstand voltage	1. DC250V, 1min.(between shield and signal cable) 2. DC250V, 1min.(between shield and sensor head
Interface indicator	DN-30
Weight	Approx. 80g(including two mounting nuts)
Accessories	Mounting nuts(2)