Watch-dog function
Display resolution, up to 1/20,000
2pcs Digital input terminal built in (Zero, Tare/Reset)
DC 24V power supply. (Without Polarity)
Data back-up function
Full Automatic Calibration method
Simulating Calibration Method (without Span weight)
Option : Rs-422 / Rs-485 Rs-232(extra) / 4~20mA or 0~10V output
Small size(48*48*118mm)
Watch-dog function
Display resolution, up to 1/20,000
2pcs Digital input terminal built in (Zero, Tare/Reset)
DC 24V power supply. (Without Polarity)
Data back-up function
Full Automatic Calibration method
Simulating Calibration Method (without Span weight)
Option : Rs-422 / Rs-485 Rs-232(extra) / 4~20mA or 0~10V output
Small size(48*48*118mm)
General Spectification |
|
Input Sensitivity |
0.45㎶ / Digit |
Load Cell Excitation |
DC 5V |
Max. Signal Input Voltage |
Max.32mV |
Temperature Coefficient |
[Zero] ±20PPM/℃ / [Span] ±20PPM/℃ |
Input Noise |
±0.6㎶ P.P |
Input Impedance |
Over 10㏁ |
A/D Conversion Method |
Sigma-Delta |
A/D Resolution(Internal) |
260,000 Count(18bit) |
A/D Sampling Rate |
Max. 80times / Sec |
Non-Linearity |
0.01% FS |
Display Resolution(External) |
1/30,000 |
Display Part |
||
Display |
Parts |
Specification |
Display |
Main Display |
7Segments, 5 Digit RED LED Display |
Size :12.7mm(H)×7.3mm(W) |
||
Min. Division |
×1, ×2, ×5, ×10, ×20, ×50 |
|
Max. display value |
+99,950 |
|
Under Zero value |
"-" (Minus display) |
|
Status lamp |
Zero, Stable, Low, High, OK, Hold, Comm. |
RED LED Display(3Ø) |
K e y |
Function keys |
Zero / F / Set / Enter |
- Option |
|
Option No.1 |
RS-422,RS485 |
Option No.2 |
4~20mA (Analogue Output |
Option No.3 |
0~10V (Analogue Output) |
|