WP Editor : This data logger is 4-6 channels dynamic & static strain measurement equipment which can monitor result and record data without PC by built-in touch screen and SD memory card. This data logger can be measured for static without PC because of has built-in SD memory and touch screen. Strain measured after strain gage is wired, and strain gauge type sensors as like load cell, pressure sensor, torque sensor, LVDT and can be potentiometer, etc can be measured. The data can be transmited to PC easy through the front side USB port.
Feature
* 4-6 channels static & dynamic data logger.
* Multi functions with touch screen and bult-in data memory
* Built-in 120Ω, 350Ω bridge circuit
* Remove noise by low pass filter.
* Auto zero by auto zero button
* 1gage 3wire type, 2gage, 4gage bridge can be connected.
* Use both Tajimi and 5p Screw connector
* Small size, light weight and USB interface
Specification│
Model
|
DL-152
|
|
Number of Channel
|
4 Channels
|
|
Display & Data Memory
|
5.6" TFT Touch LCD
4G SD Data Memory , USB Memory Stick Port (EXT)
|
Measure Hz
|
1000 Hz
|
Connector for sensor
|
5p Screw connector & TAJIMI
|
Input Sensor
|
- 1Gage & 2Gage : 120Ω , 350Ω
- 4Gage Bridge Sensor : 0.5 mV/V ~ 100mV/V
- Potentionmeter Sensor
- Pt100 RTD
- Voltage : 10V
|
Strain Input Range
|
10000, 100000, 1000000 X 10-6 strain
|
Low Pass Filter
|
10Hz, 100Hz, 1Khz, Pass
|
Interface
|
USB
|
Program
|
Multiscan S/W & Multiload S/W
|
Demension
|
140(W)*190(H)*270(D)mm
|
Power
|
AC220V, 50~60Hz
|