Digital indicator that displays the individual outputs and sum
of the outputs of the four load cells. Suitable for high weight
hopper, tank scale. Each load cell can be individually calibrated via the DSC40 and indicators.
Watch dog
Display part and analogue zero by auto zero(DAC)
Relay output : Hi, Low, NG, OK.
Digital indicator that displays the individual outputs and sum
of the outputs of the four load cells. Suitable for high weight
hopper, tank scale. Each load cell can be individually calibrated via the DSC40 and indicators.
Watch dog
Display part and analogue zero by auto zero(DAC)
Relay output : Hi, Low, NG, OK.
Specification
Spec.Model |
DN-340 |
DSC40 |
|
SIGNAL |
- |
1 ~ 3mV/V |
|
ANALOG OUT |
DC 0~10V (4 ~ 20mA option) |
- |
|
EXCITATION |
- |
5V |
|
Pressure Sensor count |
- |
4 Channel |
|
Available Sensors |
- |
Stainless gauge sensor (bridge 120W, 350W, 700W) |
|
Display range |
Individual display: -1999 ~ +9999 Sum display: -19999 ~ +99999 |
- |
|
A/D converter |
- |
24 bit |
|
D/A converter |
16 bit |
- |
|
Temp. |
ZERO |
- |
0.5μV/℃ |
SPAN |
- |
50ppm/℃ |
|
Measurement display |
Individual display:7 segment LED 8mm Sum display:7 segment LED 14mm |
- |
|
Status LED |
Red LED 6 EA |
- |
|
Key switch |
4 EA |
- |
|
Comparison output |
Upper limit (HI), lower limit (LO), normal (OK) Output (4 Relay) |
- |
|
Contact capacity |
AC 250V 5A |
- |
|
Temperature |
-10℃~ 60, 80% RH or less |
-10℃~ 60, 80% RH or less |
|
Weight |
about 600g |
about 700g |
|
Power supply |
AC 90 ~ 240V, 50/60㎐ |
DC 8~12V, 2W |
|
CABLE GRAND |
- |
Ø8mm cable grand 5 EA |
|
OPTION |
RS232C or RS485 |
- |
|
Outer diameter |
97×97×141 mm (W×H×D) |
125×80×58 mm (W×H×D) |