Menu
Menu
Menu
Loss in weighing mode controller.
3 step precise packer/filler application
-Loass in Weighing, Packer, Limit, Hopper Scale modes
AD Sampling :200 times /sec.
6pcs Control relay built-in – 2 set points.
Part No. Memory MAX.99
Sub-display units-easy to check set point values
Automatic Free fall (In-flight) compensation Function.
Display resolution : 1/30,000
SMPS power: AV86-265V
| Specifications | Accuracy |
|---|---|
| Load cell excitation | 10VDC±5%, 320mA |
| Input Signal | 0.5 ~ 3.0mV/V |
| A/D converting speed | 200times/sec |
| A/D converter resolution | 1/520,000 counts(19bits), Δ∑ |
| Non-linearity | 0.01% of full scale |
| Zero adjustment range | -0.6mV~42mV |
| Display Unit | 7 segment, 20.0mm(H)×13.0(W)mm |
| Annunciator | steady, zero, tare, Run, SP1, SP2, hold, Interface |
| Decimal point position | 0, 0.0, 0.00, 0.000 |
| Keyboard | Number key and function key 12 PCS. |
| Temperature-drift | zero ±20PPM/℃, span ±20PPM/℃ |
| Non-linearity | 0.01% of full scale |
| Rear panel | Loadcell input : 5pin connector External control : 12pin input terminal (zero, tare, tare reset/hold/print, gross/hold reset/subprint, Current loop,RS232C) control relay output : 7pin terminal |
| Power | SMPS Free Voltage (85V~265V) |
