home HOME > Indicator

Digital indicator - DN100,200


The DN-100 and DN200 have designed specifically to operate with strain gauge sensors such as Fast - measurement of Loadcell, Torquemeters, Pressure Transducer, LVDT, etc,.

DN100 : sampling speed : Appr. 5000Times Per Second

DN200 : sampling speed : Appr. 1000Times Per Second





  • High resolution
  • High precision (more than 0.01% F.S) and stability
  • Relay output : Hi, Low, NG, OK.
  • UNIT CONVERSION : kg, N, ℓb, kg/㎠, bar, MPa
  • Calibration of actual load and sensor output value
  • Built-in Shunt calibration switch
  • Peak & sample hold
  • Watch dog


  • OP-01 : BCD paralle out
  • OP-02 : RS232C serial interface
  • OP-03 : RS485 Multi drop interface


    Specification DN100 DN200
    Application sensor Strain guage sensors 
    Sensor authorized voltage
    (the number of Loadcell connection)
    DC 5V, Loadcell(350Ω) available 4
    Zero adjustment range 00%F·S (Auto Zero)
    Input signal 0.5~3mV/V
    Display -19999~+99999
    Character height 7Segment 14mm & 10mm
    Decimal point Random setting available
    A/D converter 16bit 5000 times/sec 24bit 1000 times/sec
    D/A converter 16bit 1000 times/sec 16bit 1000 times/sec
    Relay output Contact capacity : AC250V 5A ,  Relay life time : more than 5,000,000 times
    Zero variation Within 0.5μV/℃
    Sensitivity variation Within 0.01%/℃
    Voltage output DC 0 ~ 10V (4~20mA : in accordance with customer request)
    Usage temperature range -10℃ ~ 60℃
    Humidity Less than 80% RH (no dew condensation)
    Power source used AC 85 ~ 265V 50/60Hz
    Option Weight: 1000g
    OP-01 : BCD output
    OP-02 : RS232C serial interface
    OP-03 : RS485 Multi drop interface
    OP-04 : RS422A serial interface
    OP-06 : Power 24VDC

    제품치수 (unit:mm)

torque sensor l loadcell l Tension load cell l Strain gauge load cell l Torque Sensor l Torque transducer l Digital weighing indicator l Explosion proof indicator l Force gauge l Pressure sensor