home HOME > Indicator

Digital weighing indicator - DN510N

list

  • Control for PACKER, FILLER, HOPPER
  • CHECKER, LIMIT SCALE etc.
  • Totaling function by Parts.(50 parts)
  • 4 Step control (SP1, SP2, SP3, SP4)
  • 6 control relay built-in (SP1, SP2, SP3, SP4, FINISH, NEAR ZERO)
  • Various Relay output mode (LIMIT, PACKER,  CHECKER1, CHECKER2)
  • Improved A/D Conversion speed and resolution(Max. 200times, 1/520,000)

catalog

catalog

qna

SPECIFICATIONS

SPECIFICATIONS TABLE
Specifications Accuracy
Load cell excitation 10VDC±5%, 320mA
Input Signal 0.5 ~ 3.0mV/V
A/D converting speed 200times/sec
A/D converter resolution 1/520,000 counts(19bits), Δ∑
Non-linearity 0.01% of full scale
Zero adjustment range -0.6mV~42mV
Display Unit 7 segment, 20.0mm(H)×13.0(W)mm
Annunciator steady, zero, tare, gross, auto, print, hold,Interface
Decimal point position 0, 0.0, 0.00, 0.000
Keyboard Number key and function key 12 PCS.
Temperature-drift zero ±20PPM/℃, span ±20PPM/℃
Non-linearity 0.01% of full scale
Rear panel Loadcell input : 5pin connector
External control : 12pin input terminal
(zero, tare,tare reset/hold/print, gross/hold reset/subprint,Current loop, RS232C)
control relay output : 7pin terminal
Power SMPS Free Voltage (85V~265V)

DIMENSIONS

torque sensor l loadcell l Tension load cell l Strain gauge load cell l Torque Sensor l Torque transducer l Digital weighing indicator l Explosion proof indicator l Force gauge l Pressure sensor