home HOME > Indicator

Digital weighing indicator - DN540N


  • Control by quantity
  • Application of Counting Packer, Hopper, Counting grader, Counting Scale, etc.
  • Totaling function by Parts
  • Various Relay output mode
  • Improved A/D Conversion speed and resolution(Max. 200times, 1/520,000)





Specifications Accuracy
Load cell excitation 10VDC±5%, 320mA
Input Signal 0.5 ~ 3.0mV/V
A/D converting speed 200times/sec
A/D converter resolution 1/520,000 counts(19bits), Δ∑
Non-linearity 0.01% of full scale
Zero adjustment range -0.6mV~42mV
Display Unit 7 segment, 20.0mm(H)×13.0(W)mm
Annunciator steady, zero, tare, Run, SP1, SP2, hold, Interface
Decimal point position 0, 0.0, 0.00, 0.000
Keyboard Number key and function key 12 PCS.
Temperature-drift zero ±20PPM/℃, span ±20PPM/℃
Non-linearity 0.01% of full scale
Rear panel Loadcell input : 5pin connector
External control : 12pin input terminal
(zero, tare, tare reset/hold/print, gross/hold reset/subprint, Current loop,RS232C)
control relay output : 7pin terminal
Power SMPS Free Voltage (85V~265V)



  • Analog Out-put (V-out) : 0~10V
  • Analog Out-put (I-out) : 4~20mA
  • Serial I / F : RS-422, RS-485
  • BCD In-put
  • BCD In-out
  • RS3232C and Current loop : Standard Installed



torque sensor l loadcell l Tension load cell l Strain gauge load cell l Torque Sensor l Torque transducer l Digital weighing indicator l Explosion proof indicator l Force gauge l Pressure sensor