home HOME > Indicator

Digital weighing indicator - DN550N

list

  • Application of Packer MULTIPLE Ingredient BATCHING SCALE, etc.
  • 2 Step Control (DRIB, FINAL)
  • 6 Control RELAY (FINAL, DRIB, FINISH, BATCH FINISH, ZERO)
  • RELAY output mode
  • 7PIN TERMINAL : FINAL, DRIB, FINISH, BATCH FINISH, ZERO
  • 25PIN CONNECTOR : 8PIN CONTROL
  • BCD INPUT : 25PIN CONNECTOR

catalog

 

qna

SPECIFICATIONS

ANALOG INPUT AND A/D CONVERSION
Specifications Accuracy
Load cell excitation 10VDC±5%, 320mA
Input Sensitivity 0.45㎶/D
Zero adjustment range -0.6mV~42mV : combinations of 6bit dip switch
Input voltage Max. 32mV
impedance 10㏁ (Min.)
noise 0.6㎶p.p or Less
A/D converter type : dual slope type
resolution : 1/65,000 counts(16bits)
converting speed : 20times/sec
Non-linearity 0.01% of full scale
Temperature-drift zero ±20PPM/℃
span ±20PPM/℃
Overload tolerance 10% of full capacity
Display update rate 20 times/sec

DIGITAL SECTION

DIGITAL SECTION
Specifications Accuracy
Display unit 12.7mm(1/2"), 7digits
highly bright fluorescent tube
sub display : 7segment 12digit Red-FND
size : 9.2(H)x4.8(W)mmx1line
Annunciators steady, zero, tare, gross, auto, print, hold
Decimal point position 0, 0.0, 0.00, 0.000
Keyboard ten key, zero, tare, tare reset, print, gross/net, grand total,
sub total, parts, number, hold, reset, auto, code, s/n&enter
DN510A : run, standby, sp1, sp2, sp3, sp4
External input signal opical-isolator
min. Division x1, x2, x5, x10, x20, x50
max. Display +550,000
Rear panel Loadcell input : 5pin connector
Remote control : 5pin input terminal (start, stop, tare, tare reset, zero)
BCD input : 37pin connector
C ontrol relay : 7pin terminal (final, drib, finish, batch finish, zero)
25pin : connector : 8pin control

GENERAL

GENERAL
Specifications Accuracy
Data memory back-up appr. 10year
Power 100/117/120/220/240V AC, ±10%, 50/60㎐ (factory preset)
Power consumption appr. 30VA
Operating condition temperature : -10~40℃ (14~104℉)
humidity : 85% Rh Max. (non-condensing)
Net weight 2.4kg
Gross weight 3.1kg
Physical dimensions (WxDxH) 200x175x105mm / (WxDxH) 7.87x6.89x4.33inch
Fuse 250V/1A

 

Option

  • Printer I/F : Centronics Parallel
  • Analod Out : V - out(0~10V)
  • Analod Out : I - out(4~20mA)
  • Serial I/F : RS 422, RS485
  • BCD Out-put

 

DIMENSIONS

Applications

torque sensor l loadcell l Tension load cell l Strain gauge load cell l Torque Sensor l Torque transducer l Digital weighing indicator l Explosion proof indicator l Force gauge l Pressure sensor