home HOME > Indicator

Digital weighing indicator - DN511A

list

 Multi-Functional Control purpose Indicator
   - Packer, Limit weighing modes
  1.0 inch Red FND Display
  4 Section Multi-Calibration--
  A/D Sampling : 80times/sec
  4pcs Control Relay buitl in -  4 set points (Low, High, Finish, Zero)
  Free Fall setting for Low/High Set Value
  Rs-232C Serial Interface built in(Standard)
  Display Resolution : 1/30,000
  Part No. Memory, Max.99
  Serial Interface Max. 4pcs
  Current Loop 1port standard built in
  Trans type Power Supply - AV110/220V
    (Dip S/W selectable)

 

 

qna

 

Application Relay Mode

 

General Spectification

Input Sensitivity

0.45 / Digit

Load Cell Excitation

DC 10V ( - 5V ~ + 5V )

Max. Signal Input Voltage

Max.32mV

Temperature Coefficient

[Zero] ±20PPM/ / [Span] ±20PPM/

Input Noise

±0.6 P.P

Input Impedance

Over 10

A/D Conversion Method

Sigma-Delta

A/D Resolution(Internal)

260,000 Count(19bit)

A/D Sampling Rate

Max. 80times / Sec

Non-Linearity

0.01% FS

Display Resolution(External)

1/30,000

 

Display Part

Display

Parts

Specification

Display

Main Display

7Segments, 6 Digit RED FND Display

Size :25.4mm(H)×14.4mm(W)

Min. Division

×1, ×2, ×5, ×10, ×20, ×50

Max. display value

999,950

Under Zero value

"-" (Minus display)

Status lamp

Steady, Zero, Low, High, OK(Finish), g, kg, ton, Tare, RTxD.

Green color Condition display Lamp (10pcs)

K e y

Number, Function Key 

Number Key, Function (12pcs) 

 

- Option

Option No.1

0~10V (Analogue Output)

Option No.2

4~20mA (Analogue Output)

Option No.3

RS422/485(Serial interface)

Option No.4

 

  Serial Interface (RS-232C) or Current Loop is Standard installed with 1 port.

torque sensor l loadcell l Tension load cell l Strain gauge load cell l Torque Sensor l Torque transducer l Digital weighing indicator l Explosion proof indicator l Force gauge l Pressure sensor