home HOME > Data logger

DATA LOGGER - GTDL-350,360

list

 This data logger is 16 channels dynamic strain measurement equipment which connect with PC and display graph and
record data. Strain can be measured after strain gage is wired, and strain gauge type sensors as like load cell, pressure sensor, and torque sensor, LVDT and potentiometer, RTD and thmocouple, and voltage tye sensor can be measured.

catalog

 

qna

Feature
* Max. 16 channel dynamic data logger.
* Real-time measurement by USB port
* 4 channels per slot type
* 1kHz frequency measurement by each channel
* Built-in 120Ω, 350Ω bridge circuit
* Remove noise by low pass filter.
* 16bit, 200kHz high efficient A/D converter
* 1gage 3wire type, 2gage, 4gage bridge can be connected.
* Selectable both Tajimi or 5p Screw connector

Specification

 

Model

GTDL-350

GTDL-360

Number of Channel

4, 8, 12, 16 channel

4, 8, 12, 16, 20, 24, 28, 32, 36, 40 channel

Measure Hz

1000Hz

Connector for sensor

5p Screw connector or TAJIMI

 

Input Sensor

- 1Gage & 2Gage : 120Ω, 350Ω

- 4Gage Bridge Sensor : 0.5 mV/V ~ 100mV/V

- Potentionmeter Sensor

- Voltage : 10V

Strain Input Range

10000, 100000, 1000000 X 10-6 strain

Low Pass Filter

10Hz, 100Hz, 1Khz, Pass Program Selectable

Interface

USB

Program

Multiscan S/W & Multiload S/W

Demension

260(W)*190(H)*270(D)mm

470(W)*190(H)*320(D)mm

Power

AC220V, 50~60Hz

DL350-lart.jpg 

 

 

 

 

torque sensor l loadcell l Tension load cell l Strain gauge load cell l Torque Sensor l Torque transducer l Digital weighing indicator l Explosion proof indicator l Force gauge l Pressure sensor