Toque Sensors

Dacell is providing ultra-precision load cells and various weighting and measuring products,
which can be used in various fields of industries, based on 20 years of experiences in manufacturing
of weighing and measuring products and with own superior technologies.

eb0e7e6a75b2d2fcc5a8ca383239a222.jpg
MP-981

RPM processor/tachometer (frequency input). The setup sequence is simple and quick using four push buttons only.

 

WP Editor :

RPM processor/tachometer (frequency input). The setup sequence is simple and quick using four push buttons only.


 


 

SPECIFICATIONS

SPECIFICATIONS TABLE
Specifications Accuracy
Detection method Hall element
Measurement range 1㎐~20㎑(using a 60P/R gear, 1~20,000r/min, with
an output waveform duty cycle 50%±20%)
Detection gear Strong magnetic materials
Gap between detector and gear (modulus 0.5~3, tooth width 3 mm or greater)
Power supply used DC 12V±2V(0.5Vp-p or less ripple)
Current consumption 40mA or less(12V, at 25℃)
Output waveform Lew level;±0.5V rectangular waveform(With no loac)
Output impedance Approx. 330Ω
Output type Floating groung
Protective circuit Power supply polarity and output short protection
Operating temperature range -10℃~+70℃
Storage temperature range -20℃~+80℃
Matching connector 6-pin connector(type R04-PB6F plug)
Allowable vibration double-ended 1.2mm at 30㎐ in X, Y and Z direction
(during-operation) for one hour each
Allowable shock(non-operating) 490m/s2 in X and Y direction each 3 times
Withstand voltage 1. DC250V, 1min.(between shield and signal cable)
2. DC250V, 1min.(between shield and sensor head
Interface indicator DN-30
Weight Approx. 80g(including two mounting nuts)
Accessories Mounting nuts(2)

DIMENSIONS

dw_mp981.gif