Меню
Меню
Меню
This product is a Strain Amplifier displaying ±10V analogue signals on LCD screen by calculating various sensor's
input signals. This has the functions of strain measurement and analogue output and more functions than existing
universal amplifier.
Feature
* Real data value and out voltage can be checked.
* Kind of sensor, sensor spec, deciaml points can be setted by
touch screen.
* No need bridge box by Built-in 120Ω, 350Ω bridge circuit.
* 19" rack (3U) can be intalled.
* D/A offset and D/A span can be setted.
* 2channels per slot type
* Use both roud type connector or 5p Screw connector
Specification│
|
Model |
SA-16 |
|
Number of Channel |
4, 6 channel |
|
Display |
5.6 inch TFT Touch LCD |
|
Measure Hz |
10kHz |
|
Analog Output Hz |
10kHz |
|
Input Sensor |
- 1Gage & 2Gage : 120Ω, 350Ω - 4Gage Bridge Sensor : 0.5 mV/V ~ 100mV/V - Potentionmeter Sensor - Voltage : 10V |
|
Strain Input Range |
10000, 100000, 1000000 X 10-6 strain |
|
Low Pass Filter |
10Hz, 100Hz, 1Khz, 10Khz |
|
Bridge EXC Voltage |
2Volt, 5Volt, 10Volt |
|
A/D Convertion |
16Bit 10,000times/sec. |
|
D/A Convertion |
16Bit 10,000times/sec. |
|
Demension |
450(W)*132(H)*280(D)mm, 19" Rack 3U SIZE |
|
Power |
AC220V 50~60Hz |