Индикаторы

Dacell is providing ultra-precision load cells and various weighting and measuring products,
which can be used in various fields of industries, based on 20 years of experiences in manufacturing
of weighing and measuring products and with own superior technologies.

DN510N-t.jpg
DN510N
  • Control for PACKER, FILLER, HOPPER
  • CHECKER, LIMIT SCALE etc.
  • Totaling function by Parts.(50 parts)
  • 4 Step control (SP1, SP2, SP3, SP4)
  • 6 control relay built-in (SP1, SP2, SP3, SP4, FINISH, NEAR ZERO)
  • Various Relay output mode (LIMIT, PACKER,  CHECKER1, CHECKER2)
  • Improved A/D Conversion speed and resolution(Max. 200times, 1/520,000)
WP Editor :

  • Control for PACKER, FILLER, HOPPER

  • CHECKER, LIMIT SCALE etc.

  • Totaling function by Parts.(50 parts)

  • 4 Step control (SP1, SP2, SP3, SP4)

  • 6 control relay built-in (SP1, SP2, SP3, SP4, FINISH, NEAR ZERO)

  • Various Relay output mode (LIMIT, PACKER,  CHECKER1, CHECKER2)

  • Improved A/D Conversion speed and resolution(Max. 200times, 1/520,000)



SPECIFICATIONS

SPECIFICATIONS TABLE
Specifications Accuracy
Load cell excitation 10VDC±5%, 320mA
Input Signal 0.5 ~ 3.0mV/V
A/D converting speed 200times/sec
A/D converter resolution 1/520,000 counts(19bits), Δ∑
Non-linearity 0.01% of full scale
Zero adjustment range -0.6mV~42mV
Display Unit 7 segment, 20.0mm(H)×13.0(W)mm
Annunciator steady, zero, tare, gross, auto, print, hold,Interface
Decimal point position 0, 0.0, 0.00, 0.000
Keyboard Number key and function key 12 PCS.
Temperature-drift zero ±20PPM/℃, span ±20PPM/℃
Non-linearity 0.01% of full scale
Rear panel Loadcell input : 5pin connector
External control : 12pin input terminal
(zero, tare,tare reset/hold/print, gross/hold reset/subprint,Current loop, RS232C)
control relay output : 7pin terminal
Power SMPS Free Voltage (85V~265V)


DIMENSIONS