Menu
Menu
Menu
| 规格 | 参数值 | |
|---|---|---|
| 传感器激励 | 10VDC±5%, 320mA | |
| 输入灵敏度 | 0.45㎶/D | |
| 零点校准范围 | -0.6mV~42mV : combinations of 6bit dip switch | |
| 输入 | 电压 | Max. 32mV |
| 阻抗 | 10㏁ (Min.) | |
| 干扰 | 0.6㎶p.p or Less | |
| A/D 转换器 | type : dual slope type resolution : 1/65,000 counts(16bits) converting speed : 20times/sec |
|
| 非线性 | 0.01% of full scale | |
| 温漂 | zero ±20PPM/℃ span ±20PPM/℃ |
|
| 安全过载 | 10% of full capacity | |
| 显示变化速率 | 20 times/sec | |
| 规格 | 参数值 |
|---|---|
| 显示单元 | 12.7mm(1/2"), 7digits highly bright fluorescent tube sub display : 7segment 12digit Red-FND size : 9.2(H)x4.8(W)mmx1line |
| 信号器 | steady, zero, tare, gross, auto, print, hold |
| 小数点位置 | 0, 0.0, 0.00, 0.000 |
| 键盘 | ten key, zero, tare, tare reset, print, gross/net, grand total, sub total, parts, number, hold, reset, auto, code, s/n&enter DN510A : run, standby, sp1, sp2, sp3, sp4 |
| 外部输入信号 | opical-isolator |
| 最小分配 | x1, x2, x5, x10, x20, x50 |
| 最大显示 | +550,000 |
| 背板 | Loadcell input : 5pin connector Remote control : 5pin input terminal (start, stop, tare, tare reset, zero) BCD input : 37pin connector C ontrol relay : 7pin terminal (final, drib, finish, batch finish, zero) 25pin : connector : 8pin control |
| 规格 | 参数值 |
|---|---|
| 数据储存 | appr. 10year |
| 电源 | 100/117/120/220/240V AC, ±10%, 50/60㎐ (factory preset) |
| 耗电量 | appr. 30VA |
| 操作条件 | 温度 : -10~40℃ (14~104℉) 湿度: 85% Rh Max. (non-condensing) |
| 净重 | 2.4kg |
| 毛重 | 3.1kg |
| 尺寸 | (WxDxH) 200x175x105mm / (WxDxH) 7.87x6.89x4.33inch |
| 保险 | 250V/1A |
