인디케이터

다양한 모델의 제품을 개발하여 생산하고 현재 수입에만 의존하고 있는 Torque Transducers를
자체 기술력으로 시판하여 세계 50여개 국에 수출하여 그 품질을 인정 받고 있습니다.

DAT 11

빠른 데이터 처리

Mounting type: 35 mm DIN rail 장착

보정은 전면 덮개로 보호되는 세개의 버튼으로 설정.

탈착식 screw terminal blocks.

작은 폭의 사이즈로 판넬에 많은 수의 인디케이터 설치가능.

multiple serial interfaces (RS485, RS232, ASCII and Modbus RTU protocols)

The analog output (0~20 mA, 4~20 mA, 0~10 Vdc, 0~5 Vdc)

The functions of ZERO and CALIBRATION as well as datasheet and real calibration.

Two SET POINTs

워드프레스 내장 에디터 :

빠른 데이터 처리

Mounting type: 35 mm DIN rail 장착

보정은 전면 덮개로 보호되는 세개의 버튼으로 설정.

탈착식 screw terminal blocks.

작은 폭의 사이즈로 판넬에 많은 수의 인디케이터 설치가능.

multiple serial interfaces (RS485, RS232, ASCII and Modbus RTU protocols)

The analog output (0~20 mA, 4~20 mA, 0~10 Vdc, 0~5 Vdc)

The functions of ZERO and CALIBRATION as well as datasheet and real calibration.

Two SET POINTs

AVAILABLE VERSION:

• DAT 11/A: version with the analog output.

• DAT 11/PROFINET: weight transmitter with RS232 serial output, USB and PROFINET.

• DAT 11/ETHERNET IP: weight transmitter with serial output RS232 and ETHERNET IP.

• DAT 11/ETHERCAT: weight transmitter with serial output RS232 and ETHERCAT.

• DAT 11/ETHERNET: weight transmitter with serial output RS232 and ETHERNET.

• DAT 11/PROFIBUS: weight transmitter with serial output RS232 and PROFIBUS.

• DAT 11/CANOPEN: weight transmitter with serial output RS232 and CANOPEN.

Measuring range: -7.6 ~ +7.6 mV/V
Input sensitivity: 0.02 µV/count
Full scale non-Linearity: <0.01%
Gain drift: < 0.002% FS/°C
Display: 6 digit, 7-segment LED red, height 8mm
A/D Converter: 24 bit
Internal Resolution: > di 16.000.000 points
Frequency signal acquisition: 13 ~ 1.000 Hz
Visible resolution (in divisions): 999999
Divisions value (adjustable): x1, x2, x5, x10, x20, x50
Decimal figures range: 0 ~ 4
Temperature range: -10 ~ +50°C (max umidity 85% without condensation)
Storage temperature: -20 ~ +60°C
Filter: 0.1 ÷ 250 Hz
Excitation voltage: 4 Vdc (max 4 -350 Ohm- load cells)
Logic output: 2 optoisolated outputs; max 24 Vdc/100 mA each
Logic input: 2 optoisolated inputs 24 Vdc PNP (external power supply)
Serial port: 1 USB-C device + 1 RS232C + 1 RS485/Fieldbus; ASCII or Modbus RTU protocol
Analog output Non-Linearity: <0.03%
Temperature drift analog output: 0,002% FS / °C
Power supply: 24 Vdc ±10% - power consumption 5 W
Microcontroller: ARM Cortex M0 + 32 bit 256KB Flash reprogrammable onboard via USB
Data storage: 32 Kbytes expandable up to 1024 Kbytes (optional)
Regulatory compliance: EN61000-6-2, EN61000-6-3 for EMC; EN61010-1 for Electrical Safety; EN45501 for Metrology